Dhanvantree

Dhanvantree

Dhanvantree

Banking and PSU Funds: SEBI Rules, Issuers & Credit Risk

Table of Contents

Under Paragraph 3.8.2 of the SEBI Master Circular dated 20 March 2026, banking and psu funds are open-ended debt schemes required to invest at least 80 percent of their eligible asset base in debt instruments of banks, Public Sector Undertakings, Public Financial Institutions, and Municipal Bonds. Rather than advancing direct loans, these schemes purchase tradable bonds and money-market paper in secondary debt markets.

Dhanvantri Capital Services Private Limited, known as Dhanvantree, is an AMFI-registered mutual fund distributor, ARN-194216. Our role is limited to distributing mutual fund products. We do not manage the schemes or portfolios. We name no scheme on this page. The choice is yours.

How SEBI Defines the Eligible Institutional Universe

Many retail summaries mistakenly claim that a banking and psu debt fund lends money directly to banks or public sector companies. Mutual funds do not operate as commercial lenders and cannot issue credit lines. Instead, fund managers act as institutional buyers on wholesale bond markets, purchasing non-convertible debentures (NCDs), bonds, and short-term money-market securities issued by eligible entities.

In the consolidated SEBI Master Circular for Mutual Funds dated 20 March 2026, SEBI classifies fixed-income schemes using three distinct lenses: portfolio maturity, credit rating tier, or borrower identity. While corporate bond funds are bound by a credit-rating floor (AA+ and above), Banking and PSU Funds are governed strictly by who issues the debt.

SEBI restricts the core allocation to four specific institutional borrower groups:

  • Scheduled Commercial Banks: Banking institutions listed in the Second Schedule of the Reserve Bank of India Act, 1934. This group encompasses both public sector banks and private commercial banks. Schemes buy their Certificates of Deposit (CDs), senior debentures, and Basel III regulatory capital instruments.

  • Public Sector Undertakings (PSUs): Commercial enterprises incorporated under company law in which the Central Government, one or more State Governments, or both jointly hold at least 51 percent of the paid-up equity share capital. Active bond issuers include power transmission utilities, railway finance corporations, and petroleum refiners.

  • Public Financial Institutions (PFIs): Specialized statutory institutions established under central legislation or notified by the Central Government under Section 2(72) of the Companies Act, 2013, such as national development banks and housing or agricultural refinancing bodies.

  • Municipal Bodies: Local urban authorities authorized to issue municipal debt securities under SEBI’s municipal bond regulations to fund civic water, sanitation, and urban transport infrastructure.

Why the 80 Percent Rule Translates Into a 72 Percent Net Asset Floor

Reading the category table alone gives the impression that at least 80 percent of every rupee in the fund sits in banking and public sector securities. In practice, Paragraph 5.7.2 of the March 2026 Master Circular introduces a mandatory liquidity carve-out that changes the arithmetic.

Open-ended debt mutual funds (barring specified exceptions) must hold at least 10 percent of their net assets in specified liquid assets—strictly defined as cash, Government Securities, Treasury Bills, and repo on Government Securities. For compliance testing, SEBI excludes this mandatory 10 percent liquid holding from the denominator.

For an illustrative ₹1,000 crore scheme holding the minimum 10 percent liquid reserve, the statutory allocation breaks down as follows:

Portfolio Layer Regulatory Rule Illustrative ₹1,000 Cr Portfolio Permitted Instruments
Mandatory Liquid Buffer Minimum 10% of total net assets (Para 5.7.2) ₹100 crore Cash, G-Secs, T-Bills, and G-Sec repos
Allocation Calculation Base Remaining 90% of net assets (100% − 10%) ₹900 crore Base used to test category mandate compliance
Core Institutional Allocation Minimum 80% of the 90% base (72% of total net assets) ₹720 crore minimum Debt and money-market paper of Banks, PSUs, PFIs, and Municipal Bodies
Remaining Discretionary Space Up to 20% of the 90% base (18% of total net assets) Up to ₹180 crore Additional G-Secs, State Development Loans, or other debt permitted by the SID

Because the category rule is anchored to issuer identity rather than a credit-rating floor, SEBI imposes no minimum rating bar on this category. A scheme can hold an AA-rated bond issued by an eligible public sector enterprise while remaining compliant with regulatory limits. Broader category rules across fixed income are outlined under types of mutual funds.

Why Public Sector Ownership Is Not a Sovereign Guarantee

The single largest misunderstanding surrounding this category is the belief that “PSU” equals a Government of India repayment guarantee. Retail commentary often calls these instruments “quasi-sovereign,” leading investors to assume that state shareholding shields bondholders from credit losses.

That assumption confuses equity ownership with a contractual debt obligation.

A Government of India dated security (G-Sec) or Treasury Bill is a direct, unconditional obligation of the sovereign state, backed by the Consolidated Fund of India, parliamentary taxation powers, and sovereign currency management.

A PSU bond, by contrast, is corporate debt issued by a separate legal entity registered under the Companies Act, 2013. Even when the President of India or a state governor holds a majority of the company’s equity shares, the Central or State Government is not automatically liable for the enterprise’s corporate debentures.

Under the Government Guarantee Policy of the Ministry of Finance, a public sector borrowing carries sovereign backing only when the competent government authority approves and executes an explicit, unconditional guarantee contract under Article 292 of the Constitution of India. Routine corporate debentures issued by PSUs in the Indian debt market do not carry this explicit guarantee.

Without a formal guarantee deed, bondholders have legal recourse solely against the commercial revenues, receivables, and balance-sheet assets of the borrowing company. If a state-owned enterprise encounters sector headwinds, cost overruns, or operating losses, rating agencies can downgrade its debt, causing secondary-market bond prices to drop.

Because institutional investors price PSU debt as corporate credit rather than sovereign debt, PSU debentures trade at a higher yield than G-Secs of matching maturity. That yield gap—the credit spread—widens or narrows depending on market liquidity and the issuer’s financial health. How sovereign securities operate without corporate credit spreads is detailed under government securities and gilt funds.

Bank Debt Hierarchy: Senior Bonds Versus Additional Tier-1 Perpetual Debt

Not all debt issued by a commercial bank carries the same repayment priority. Under Reserve Bank of India (RBI) Basel III capital adequacy rules, banks raise funds across distinct layers of their capital structure, and each layer carries a different risk profile inside a mutual fund portfolio.

1. Senior Debentures and Certificates of Deposit

Senior non-convertible debentures and short-term Certificates of Deposit sit at the top of a commercial bank’s debt repayment hierarchy. If a bank enters resolution or liquidation, senior debt claims must be satisfied before any subordinated bondholder receives payment.

2. Tier-2 Subordinated Bonds

Tier-2 bonds count as supplementary regulatory capital. They carry fixed maturity dates and absorb losses ahead of senior depositors and senior creditors, though they rank senior to equity and perpetual instruments during insolvency.

3. Additional Tier-1 (AT1) Perpetual Bonds

Additional Tier-1 bonds are hybrid perpetual debt instruments issued with no contractual maturity date. Under RBI Basel III regulations, AT1 instruments contain statutory loss-absorption clauses designed to rescue a troubled bank while it remains a going concern:

  • Common Equity Tier 1 (CET1) Trigger: If an issuing bank’s CET1 capital ratio falls to or below 6.125 percent of risk-weighted assets, the bank is contractually required to write down the principal value of its AT1 bonds or convert them into common equity shares.

  • Point of Non-Viability (PONV) Trigger: If the RBI determines that a bank has reached the Point of Non-Viability and cannot survive without external capital intervention, the regulator holds statutory power to mandate a permanent write-off or equity conversion of the bonds.

Following past bank restructurings in India where AT1 write-downs caused direct principal losses for debt fund unitholders, SEBI enforced strict prudential boundaries on mutual fund investments in perpetual debt instruments:

  • Scheme-Level Exposure Caps: A mutual fund scheme cannot invest more than 10 percent of the Net Asset Value of its debt portfolio in perpetual debt instruments across all issuers, and cannot allocate more than 5 percent to perpetual bonds issued by a single bank.

  • AMC-Wide Single-Issuer Cap: Aggregate holdings across all schemes managed by an asset management company cannot exceed 10 percent of the total perpetual debt issued by an individual bank.

  • Deemed 100-Year Valuation Maturity: Under SEBI valuation rules carried into the Master Circular, perpetual bonds must be valued using a deemed maturity of 100 years from issuance. Assigning a 100-year maturity magnifies the bond’s Macaulay duration and causes sharper daily mark-to-market price swings whenever market interest rates move.

  • Potential Risk Class Restriction: Fresh mutual fund investments in perpetual bonds are permitted only in schemes positioned within Class III (highest interest-rate risk bucket) of SEBI’s Potential Risk Class matrix.

Investors reviewing a scheme’s monthly factsheet should check the portfolio breakdown to see whether the fund manager holds senior bank paper or subordinated AT1 instruments to boost portfolio yield.

How Banking and PSU Funds Differ From February 2026 Sectoral Debt Funds

In February 2026, SEBI introduced a new fixed-income category: Sectoral Debt Funds. Because the name “Banking and PSU” mentions a specific industry, investors sometimes confuse the two classifications.

A Sectoral Debt Fund concentrates at least 80 percent of its debt portfolio in issuers belonging to a single economic sector—such as Power, Real Estate, or Financial Services. That structure exposes unitholders directly to sector-specific regulatory changes, commodity cycles, and credit stress within one industry.

Banking and psu debt funds do not operate as single-sector vehicles. While the banking sleeve provides exposure to commercial lenders, the PSU and PFI sleeve spans multiple unrelated industries—including power generation, railway infrastructure, oil refining, housing finance, and agricultural credit. A cyclical slowdown in commercial banking does not automatically impair the cash flows of a state-owned power transmission utility.

Issuer Universe Comparison: Banking and PSU, Corporate Bond, and Gilt Funds

Comparing medium-duration debt categories requires looking at the legal nature of the borrowers each category is permitted to hold:

Scheme Category Eligible Issuer Universe Sovereign Guarantee & Credit Structure Primary Regulatory Boundary
Banking and PSU Funds Scheduled Commercial Banks, PSUs, PFIs, and Municipal Bodies Corporate debt of state-linked entities and commercial banks; no automatic sovereign guarantee Minimum 80% of eligible base (72% net floor) defined strictly by borrower identity
Corporate Bond Funds Private and public corporations issuing bonds rated AA+ and above Corporate balance-sheet debt without sovereign backing; credit spreads vary by sector Minimum 80% of total assets defined strictly by credit rating tier (AA+ and higher)
Gilt Funds Central Government and State Governments (G-Secs, T-Bills, SDLs) Direct sovereign obligation backed by constitutional taxing and currency powers Minimum 80% of total assets in government securities; zero domestic credit risk

While corporate bond funds restrict their core mandate to the two highest corporate rating notches regardless of who owns the company, credit risk funds target corporate debentures rated AA and below (excluding AA+) to earn wider credit spreads. Meanwhile, gilt funds eliminate corporate credit risk entirely by holding sovereign securities.

Portfolio Duration, Yield Sensitivity, and Taxation

  • Duration and Rate Swings: SEBI sets no fixed Macaulay duration band for Banking and PSU Funds. Most schemes operate with average durations between two and four years, meaning daily Net Asset Values fluctuate whenever secondary-market bond yields shift. How interest-rate sensitivity and Yield to Maturity work across fixed income is explained under government securities, while sub-one-year cash instruments are covered under money market funds.

  • Taxation in Tax Year 2026-27: Under Section 76 of the Income-tax Act, 2025, schemes investing more than 65 percent of total proceeds in debt and money-market instruments (measured via the prescribed annual average of daily closing figures) qualify as Specified Mutual Funds. Gains on units acquired on or after 1 April 2023 are taxed as short-term capital gains at the investor’s applicable income-tax slab rate regardless of holding period, with no indexation. Full tax rules are detailed under short-term capital gains tax on mutual funds.

Questions Investors Ask About Banking and PSU Funds

Does the government guarantee bonds issued by Public Sector Undertakings?

No. Public Sector Undertakings are incorporated corporate entities with separate legal liability. Unless the Ministry of Finance or a State Government approves and executes an explicit, unconditional guarantee contract under Article 292 of the Constitution for a specific bond issue, the government is not legally obligated to repay the debt.

Can a Banking and PSU Fund invest in private sector banks?

Yes. SEBI defines eligible bank issuers as Scheduled Commercial Banks regulated by the Reserve Bank of India, which includes both public sector banks and private commercial banks. Fund managers can invest in senior debentures, Certificates of Deposit, and regulatory capital bonds of private banks within SEBI’s single-issuer concentration limits.

Why does the NAV of a Banking and PSU Fund fluctuate if the issuers are large institutions?

Daily Net Asset Values reflect mark-to-market bond prices rather than fixed interest accrual. When market interest rates rise or credit spreads on public sector debentures widen in the secondary market, existing bond prices fall, causing the scheme’s NAV to decline—even when every issuer pays its coupons on schedule.

What happens if the government privatises a PSU held inside the fund?

If government shareholding drops below 51 percent through disinvestment, the company ceases to be a Public Sector Undertaking. The fund manager must check whether the holding fits inside the scheme’s 18 percent residual allocation or must be sold to preserve the 72 percent institutional floor. Many PSU bond trust deeds also include “change of control” clauses allowing bondholders to demand early redemption at par if sovereign ownership falls below 51 percent.

Disclaimer: The views expressed here are of the author and do not reflect those of Dhanvantree. Mutual funds are subject to market risks, please read the scheme documents carefully before investing.

Ready to level up your Investment? Reach out.